Home Products Industries Manufacturers
 Search Products by Keyword  
Home
About Us
Contact Us
How To Buy
What's New
Resources
Trade Shows
Visit the OCI Website

View our CGP Certificate

View our ISO Certificate
MEASUREMENT SPECIALTIES / IC SENSORS

The ICSensors brand brings knowledge and expertise in the areas of design and manufacturing of micromachine silicon pressure sensors, accelerometers and microstructures. A world recognized pioneer in microsensor technology, ICSensors serves industrial, medical and aerospace customers.

 
Products
 
4000A Accelerometer
Economical, signal conditioned with integral temperature compensation. Rugged aluminum housing ideal for transportation and instrumentation testing. Available in ±2g to ±200g.
4001A Accelerometer
The Model 4001A is an economical signal conditioned accelerometer with integral temperature compensation. The accelerometer incorporates an integral 5-pin connector at the end of the cable assembly. Available in ranges from ±2g to ±200g.
4002 Accelerometer
The Model 4002 is a low frequency DC response accelerometer with exceptional resolution. The accelerometer is designed for optimum signal-to-noise ratio and offers an amplified signal conditioned output. Available in ranges from ±2g to ±200g.
4600 Accelerometer
The Model 4600 is designed for both static and dynamic measurements in critical and demanding applications. It is hermetically sealed and features high-g shock protection. Provides an amplified output. Available in ranges from ±2 to ±500g.
4602 Accelerometer
The Model 4602 is designed for both static and dynamic measurements in critical and demanding applications. The accelerometer offers outstanding thermal performance over the complete operating range from -54°C to +121°C. Provides an amplified output. Available in ranges from ±2 to ±500g.
4602 Accelerometer
The Model 4602 is designed for both static and dynamic measurements in critical and demanding applications. It is available in ranges from ±2 to ±500g and offers outstanding thermal performance. It is compensated from -55°C to +125°C. Available in ranges from ±2g to ±500g.
4604 Accelerometer
The Model 4604 is a rugged, low-profile MEMS accelerometer designed for both static and dynamic applications. The device offers outstanding thermal performance and features a robust strain relief and cable. Provides an amplified output. Available in ranges from ±2 to ±500g.
4605 Accelerometer
The Model 4605 is designed for both static and dynamic measurements in critical and demanding applications. The device offers outstanding thermal performance and features a detachable cable. Provides an amplified output. Available in ranges from ±2 to ±500g.
4610 Accelerometer
The Model 4610 is a low noise signal conditioned accelerometer with exceptional long-term stability. The accelerometer offers integral temperature compensation and a hermetically sealed sensor assembly. Provides an amplified output. Available in ranges from ±2 to ±500g.
MiniSense 100 Accelerometer
The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. The sensor has excellent linearity and dynamic range, and may be used for detecting either continuous vibration or impacts.
Accelerometers - Board Level / OEM
3022 Accelerometer
The Model 3022 is a piezoresistive silicon accelerometer packaged in a ceramic substrate with a sealed ceramic cover. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Available in ranges from ±2g to ±200g.
3028 Accelerometer
The Model 3028 is a piezoresistive silicon accelerometer packaged on a ceramic substrate with a metal bracket which can be used to bolt the sensor to the mounting location. Available in ranges from ±2g to ±200g.
3031 Accelerometer
The Model 3031 is a piezoresistive SMD accelerometer designed for demanding high volume applications. Available in ranges of ±50g and ±100g.
3038 Accelerometer
The Model 3038 is a hermetically sealed SMD accelerometer designed for high performance applications. Available in ranges from ±50g to ±6000g.
3052A Accelerometer
The Model 3052A is a piezoresistive silicon accelerometer with integral temperature compensation. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Available in ranges from ±2g to ±100g.
3058A Accelerometer
The Model 3058A is a piezoresistive silicon accelerometer with integral temperature compensation. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Available in ranges from ±2g to ±100g.
3255A Accelerometer
The Model 3255A is a two-chip accelerometer designed for surface mount applications. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Available in ranges from ±25g to ±500g.
4503 Accelerometer
The Model 4503 is an economical board mountable accelerometer. The output is signal conditioned and temperature compensated. Available in ranges from ±2g to ±200g.
4655 Accelerometer
The Model 4655 is a signal conditioned, hermetically sealed, board mountable MEMS accelerometer. The accelerometer incorporates integral temperature compensation and a frequency response from DC to 2000Hz. Provides an amplified output. Available in ranges from ±2 to ±200g.
ACH-01 Accelerometer
The ACH-01 is a low cost, robust, general purpose accelerometer with outstanding performance characteristics. It is specifically designed for high volume applications that require the permanent installation of an accelerometer.
MiniSense 100 Accelerometer
The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. The sensor has excellent linearity and dynamic range, and may be used for detecting either continuous vibration or impacts.

HM1520 Humidity Sensor
HM1520LF is a dedicated humidity transducer designed for measurements at low humidity. Direct measurement of dew point or water concentration can be easily obtained in really cost effective conditions. Direct interface with a micro-controller is made possible with the module’s linear voltage output. Typical 1 to 1.6 Volt DC output for 0 to 20% RH at 5Vdc supply.

Pressure Sensors & Transmitters - Board Mountable / OEM
1200-series Pressure Sensor
The Model 1200 series are a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual-in-line configuration. Integral temperature compensation is provided over a wide temperature range using laser-trimmed resistors. An additional laser-trimmed resistor is included to normalize pressure sensitivity variations by programming the gain of an external differential amplifier.
4416 Pressure Sensor
The 4416 is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual in-line configuration and intended for cost sensitive applications where excellent performance at low pressure ranges is required. The pressure sensor is available in gauge pressure ranges in 0-5” H20 and 0-10 H20.
4425 Pressure Sensor
The 4425 is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual in-line configuration and intended for cost sensitive applications where excellent performance and long-term stability are required. The pressure sensor is available in absolute or differential pressure ranges from 0-1 psi to 0-100 psi.
4426 Pressure Sensor
The 4426 is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual in-line configuration and intended for cost sensitive applications where excellent performance and long-term stability are required. The pressure sensor is available in absolute or gauge pressure ranges from 0-1 psi to 0-100 psi.
MS1451 Pressure Sensor
The Model MS1451 is a piezoresistive silicon pressure sensor packaged in a surface mount configuration. It is intended for high volume applications where small size, light weight, low cost, and compatibility with automated assembly equipment are required. The pressure sensor is available with a gauge or absolute pressure sensing chip that is attached to a surface mountable ceramic substrate.
MS1471 Pressure Sensor
The Model MS1471 is a piezoresistive silicon pressure sensor, calibrated at room temperature. Packaged in a surface mount configuration, it is intended for high volume applications where small size, light weight, low cost, and compatibility with automated assembly equipment are required. The pressure sensor is available with a gauge or absolute pressure sensing chip that is attached to a surface mountable ceramic substrate.
MS4400-series Pressure Sensor
The MS4400 series is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual-in-line configuration. Integral temperature compensation is provided over a 0° – 50°C temperature range using laser-trimmed resistors. The pressure ports are 1/8” barbed ports which mate with 3/32” ID tubing.

Copyright © Durham Instruments. All Rights Reserved.
1-888-DISENSOR
Website by cpNet