Home Products Industries Manufacturers
 Search Products by Keyword  
Home
About Us
Contact Us
How To Buy
What's New
Resources
Trade Shows
Visit the OCI Website

View our CGP Certificate

View our ISO Certificate
PENNY+GILES

Penny + Giles was founded in 1956 out of a partnership between Professor William A Penny and Mr James A Giles, where they identified a demand for instrumentation in the aviation industry for high precision, high reliability wire-wound potentiometric devices for customers engaged in aircraft flight testing. Our product range includes linear and rotary position sensors; LVDT and RVDT transducers; joystick controllers; studio faders; digital panel meters; solenoids; cockpit voice and flight data recorders; air data test sets; pitot-static leak testers; ice & snow detection systems.

 
Products
 
JC025 Single Axis Fingertip Rocker
The JC025 single axis fingertip rocker allows system designers to provide control of movement and speed in a single low-profile unit.
JC030 Single Axis Fingertip Rocker
The JC030 single axis fingertip rocker allows system designers to provide control of movement and speed in a single low-profile unit.
JC100 Single Axis Fingertip Joystick
Developed for applications where ergonomics and system integrity are paramount, the JC100 is a compact, low profile joystick that provides smooth, precise fingertip control in one axis.
JC120 Single Axis Fingertip Joystick
Developed for applications where ergonomics and system integrity are paramount, the JC120 is a minimum width, low profile joystick that provides smooth, precise fingertip control in one axis with a choice of two lever lengths.
JC200 Multi-Axis Inductive Joystick
The JC200 has been designed for use with a separate valve driver card or machine control unit. Safety features include a lever mechanism that returns to the centre position when released and internal fault monitoring circuits. Typical applications include the control of wheelchairs, fork lift trucks and agricultural machinery.
JC2000 Multi-Axis Contactless Joystick
The JC2000 is designed for precision fingertip control applications where safety and long trouble-free life are primary requirements. Available in one, two or three axis configurations and can accommodate a choice of handles, including push-button switch versions.
JC300 Multi-Axis Fingertip Joystick
Designed for use with an electronic controller, the JC300 can be specified to generate up to five switched outputs per half axis, or analogue and switched reference signals. Available in single, dual, or three axis.
JC3000 Single and Dual axis Fingertip Joystick
For applications requiring a simplistic approach to fingertip control where strength and reliability are important. Comes in single or dual axis & various user defined features.
JC400 Multi-Axis Fingertip Joystick
Developed for use in applications where compact size and functionality are important, the JC400 with analogue output offers proportional fingertip control in up to three axes, while the JC400 with Digital Output option offers switched fingertip control with sequential detent feel.
JC6000 Rugged Multi-Axis Joystick
The JC6000 is designed for demanding operator control applications in off-highway vehicles and other man-machine interfaces, where strength, reliability, and handle functionality are important. It is available with one or two axis configurations and can be supplied with Hall effect sensors or potentiometer tracks.

Linear Position Sensor - Hall Effect
SLH100 Hall Effect Contactless Linear Sensor
Designed to provide precision cost effective position sensing using the proven contactless Hall effect principle. The sensing system has two parts; sensor and magnetic activator.
Linear Position Sensor - In-Cylinder
ICS100 In-Cylinder Linear Potentiometer
The ICS100 is designed specifically for use in hydraulic and pneumatic actuator applications, where the sensor is fitted inside the pressurized environment. It can be supplied in lengths to suit actuator strokes up to 1100mm.
ICT050 Contactless In-Cylinder Linear Transducer
With a body diameter of only 5.4mm the ICT050 is ideal for installation into hydraulic and pnematic cylinder applications where space is at a premium. With no electrical sliding contacts, the ICT050 has a working life which is almost limitless.
ICT080 Contactless In-Cylinder Linear Transducer
With a body diameter of only 8mm the ICT080 is ideal for installation into hydraulic and pneumatic cylinder applications where space is at a premium. With no electrical sliding contacts, the ICT080 has a working life which is almost limitless.
ICT100 Contactless In-Cylinder Linear Transducer
With a body diameter of only 10.1mm the ICT100 is ideal for installation into hydraulic and pneumatic cylinder applications where space is at a premium. With no electrical sliding contacts, the ICT100 has a working life which is almost limitless.
Linear Position Sensor - Potentiometers
ICS100 In-Cylinder Linear Potentiometer
The ICS100 is designed specifically for use in hydraulic and pneumatic actuator applications, where the sensor is fitted inside the pressurized environment. It can be supplied in lengths to suit actuator strokes up to 1100mm.
MLS130 Linear Potentiometer
The MLS130 is a competitively priced linear position sensor for the motorsport industry. Available in eight stroke lengths from 25 to 200mm, the MLS130 is sealed to IP66, and is supplied with a DR25 sheathed, 3-core cable.
SLS190 Linear Potentiometer
The SLS190 is available in stroke lengths from 25 to 350mm. Using the proven benefits of Hybrid Track Technology, the SLS190 is ideally suited to high volume OEM manufacturers.

Rotary Position Sensors - Hall Effect
NRH280DP Noncontact Rotary Hall Sensor
Rotary position sensor that features a 2-piece unit - fully sealed sensor assembly and magnetized bolt. Single or dual outputs available. ***Only available for existing clients, no new customers***
NRH285DR Noncontact Rotary Hall Sensor
Operates from a 5Vdc (±0.5) regulated supply to each independent sensor channel, and has two independent outputs, enabling full redundancy from a very slim package. It has a co-moulded fully encapsulated sensor system that can withstand high shock and vibration as well as operate up to +170°C, and endure high pressure wash-downs (IP69K). ***Only available for existing clients, no new customers***
SRH280DP Contactless Rotary Position Sensor
For extreme motorsport and industrial environments where shock and vibration can occur. Uses 28mm flanged housing with protection rating to IP68.
SRH500P Contactless Rotary Sensor
The SRH500P can meet the harsh operating requirements in heavy duty industrial applications, including construction, agricultural, military and utility vehicles, steelworks, marine equipment and power generating plants. This model has an option for environmental protection to IP69K.
Rotary Position Sensors - Potentiometers
SRS280 Sealed Rotary Potentiometer
The SRS280 was developed to meet the harsh operating requirements of today´s automotive and motorsport markets. It uses hybrid potentiometer track technology, providing high stability under extremes of temperature and humidity

Solenoids - Solenoid - Valves
GV0624
A specialist solenoid valve designed for 2 or 3 way air control applications. 24mm x 16mm x 18mm 100% power 2.2 Watts dc 2 way Orifice Ø 0.75mm 3 way Orifice Ø 0.9 mm
GV0625
A specialist solenoid valve designed for air control applications.
GV0627
A specialist solenoid valve designed for air control. 2 way air valve Optional PCB mounting Optional voltage ratings 27mm x 16mm x 19mm 100% power 2.3 Watts dc Orifice Ø 1.6mm
GV1032
A specialist solenoid valve designed for air or fluid control. Key Features 2 way air or fluid valve Threaded end Optional interface available Optional voltage ratings 32mm x 21mm x 24mm 100% power 3.6 Watts dc
MV SD237
A specialist solenoid valve designed for a pneumatic control application in the automotive sector. Key Features Pneumatic ABS solenoid valve Automotive application Unique safety critical application Fast response time Customised design service available
MV SD298
A specialist solenoid valve designed for pneumatic control applications in the business machine sector. Pneumatic solenoid valve Business machines application DIN standard connections Long life
Solenoids - Solenoids - AC Laminated
ML1441
AC operated solenoids have an in-rush current, providing a high initial stroke force, and can utilise longer strokes than DC solenoids for the above reason. 41mm x 14mm x 37mm 100% power 9 Watts ac 18N force at 10mm stroke
ML1951
AC operated solenoids have an in-rush current, providing a high initial stroke force, and can utilise longer strokes than DC solenoids for the above reason. 51mm x 19mm x 53mm 100% power 15 Watts ac 12N force at 16mm stroke
ML2351
AC operated solenoids have an in-rush current, providing a high initial stroke force, and can utilise longer strokes than DC solenoids for the above reason. 51mm x 23mm x 55mm 100% power 11 Watts ac 19N force at 20mm stroke
ML2551
AC operated solenoids have an in-rush current, providing a high initial stroke force, and can utilise longer strokes than DC solenoids for the above reason. 51mm x 25mm x 53mm 100% power 17 Watts ac 15N force at 16mm stroke
ML2566
AC operated solenoids have an in-rush current, providing a high initial stroke force, and can utilise longer strokes than DC solenoids for the above reason. 66mm x 25mm x 75mm 100% power 28 Watts ac 56N force at 20mm stroke
ML2794
AC operated solenoids have an in-rush current, providing a high initial stroke force, and can utilise longer strokes than DC solenoids for the above reason. 97mm x 27mm x 94mm 100% power 40 Watts ac 42N force at 30mm stroke
ML2951
AC operated solenoids have an in-rush current, providing a high initial stroke force, and can utilise longer strokes than DC solenoids for the above reason. 51mm x 29mm x 55mm 100% power 16 Watts ac 25N force at 20mm stroke
ML3356
AC operated solenoids have an in-rush current, providing a high initial stroke force, and can utilise longer strokes than DC solenoids for the above reason. 57mm x 33mm x 56mm 100% power 16 Watts ac 20N force at 20mm stroke
ML36121
AC operated solenoids have an in-rush current, providing a high initial stroke force, and can utilise longer strokes than DC solenoids for the above reason. 133mm x 36mm x 121mm 100% power 75 Watts ac 90N force at 40mm stroke
ML3651
AC operated solenoids have an in-rush current, providing a high initial stroke force, and can utilise longer strokes than DC solenoids for the above reason. 51mm x 36mm x 55mm 100% power 21 Watts ac 30N force at 20mm stroke
Solenoids - Solenoids - Flapper
MF2228
Model MF2228 is a flapper solenoid that utilizes a hinged plate in conjunction with a solenoid coil to attract the plate when the solenoid is energised. 28mm x 22mm x 30mm 100% power 4.0 Watts dc 4mm stroke
MF2927
Model MF2927 is a flapper solenoid that utilizes a hinged plate in conjunction with a solenoid coil to attract the plate when the solenoid is energised. 27mm x 29mm x 20mm 100% power 1.0 Watts dc 1.3mm stroke
Solenoids - Solenoids - Holding Magnets
GM3522 to GM9535
A range of five models in different sizes and holding forces.
MM2520
Optional voltage ratings Potted coil option Optional mounting centres IP65 rating option Ø25mm x 20mm 100% power 8 Watts dc Minimum holding force 180N
MM3316
Optional voltage ratings Encapsulated coil Dual bearings IP65 rated Ø33mm x 16mm 100% power 8.7 Watts dc Minimum holding force 350N
MM3527
Optional voltage ratings Customised design service available Ø35mm x 27mm 100% power 4 Watts dc Minimum holding force 150N
MM6426
Optional voltage ratings Customised design service available Ø64mm x 26mm 100% power 6 Watts dc Minimum holding force 500N
Solenoids - Solenoids - Latching
GK0625
Model GK0625 latching solenoid utilizes a permanent magnet in conjunction with a solenoid coil to maintain the position of the plunger with no current applied. Ø6mm plunger 25mm x 13mm x 15mm frame size 100% power 2.5 Watts dc 2.1N force at 2mm stroke
Solenoids - Solenoids - Locks & Shotbolts
MS SD244
A special solenoid activated shot bolt that can be used typically in a variety of industrial security applications, such as machine tool guards, security doors and gates, and for general interlock applications. 50% ED power 24 Watts dc 15mm stroke
MS SD291
A special solenoid activated 90° lock that can be energised to unlock. It can be used typically in a variety of industrial security applications, such as machine tool guards, security doors and gates, and for general interlock applications.
MS1444
A special solenoid activated interlock that can be energised to unlock. It can be used typically in a variety of industrial security applications, such as machine tool guards, security doors and gates, and for general interlock applications.
Solenoids - Solenoids - Open Frame
GC0416
Model GC0416 C-Frame solenoid utilizes a C shaped steel frame 16mm x 8mm x 12mm and Ø4mm plunger. 100% power 0.8 Watts dc 0.03N force at 1mm stroke
GC0417
Model GC0417 C-Frame solenoid utilizes a C shaped steel frame 17mm x 10mm x 11mm and Ø4mm plunger. 100% power 1.5 Watts dc 0.05N force at 3mm stroke
GC0423
Model GC0423 C-Frame solenoid utilizes a C shaped steel frame 23mm x 10mm x 11mm and Ø4mm plunger. 100% power 1.4 Watts dc 0.2N force at 2mm stroke
GC0425
Model GC0425 C-Frame solenoid utilizes a C shaped steel frame 25mm x 11mm x 12mm and Ø4mm plunger. 100% power 1.4 Watts dc 0.2N force at 2mm stroke
GC0517
Model GC0517 C-Frame solenoid utilizes a C shaped steel frame 17mm x 16mm x 17mm and Ø5mm plunger. 100% power 1.5 Watts dc 0.2N force at 3mm stroke
GC0639
Model GC0639 C-Frame solenoid utilizes a C shaped steel frame 39mm x 16mm x 19mm and Ø6mm plunger.
GC0819
Model GC0819 C-Frame solenoid utilizes a C shaped steel frame 19mm x 17mm x 19mm and Ø8mm plunger. 100% power 2.0 Watts dc 0.2N force at 2mm stroke
GC0828
Model GC0828 C-Frame solenoid utilizes a C shaped steel frame 28mm x 19mm x 18mm and Ø8mm plunger. 100% power 2.4 Watts dc 0.3N force at 8mm stroke
GD0420
Type GD0420 D Frame solenoid utilizes a 4-sided closed steel frame 20mm x 11mm x 10mm and Ø4mm plunger?. 100% power 1.1 Watts dc 0.2N force at 1mm stroke
GD0522
Type GD0522 D Frame solenoid utilizes a 4-sided closed steel frame 22mm x 10mm x 15mm and Ø5mm plunger?. 100% power 1.5 Watts dc 0.17N force at 2mm stroke
GD0629
Type GD0629 D Frame solenoid utilizes a 4-sided closed steel frame 29mm x 16mm x 19mm and Ø6mm plunger?. 29mm x 16mm x 19mm 100% power 2.4 Watts dc 0.6N force at 3mm stroke
GD0730
Type GD0730 D Frame solenoid utilizes a 4-sided closed steel frame 30mm x 14mm x 16mm and Ø7mm plunger?. 30mm x 14mm x 16mm 100% power 2.2 Watts dc 0.6N force at 2mm stroke
GD0826
Type GD0826 D Frame solenoid utilizes a 4-sided closed steel frame 26mm x 25mm x 22mm and Ø8mm plunger?. 100% power 2.8 Watts dc 1.0N force at 4mm stroke
GD0829
Type GD0829 D Frame solenoid utilizes a 4-sided closed steel frame 29mm x 24mm x 30mm and Ø8mm plunger?. 100% power 3.1 Watts dc 1.0N force at 4mm stroke
GD0837
Type GD0837 D Frame solenoid utilizes a 4-sided closed steel frame 37mm x 26mm x 21mm and Ø8mm plunger?. 100% power 5.2 Watts dc 1.0N force at 6mm stroke
GD0947
Type GD0947 D Frame solenoid utilizes a 4-sided closed steel frame 47mm x 23mm x 19mm and Ø9mm plunger?. 100% power 4.3 Watts dc 1.0N force at 6mm stroke
GD1040
Type GD1040 D Frame solenoid utilizes a 4-sided closed steel frame 40mm x 20mm x 25mm and Ø10mm plunger?. 100% power 3.8 Watts dc 1.0N force at 4mm stroke
GD1240
Type GD1240 D Frame solenoid utilizes a 4-sided closed steel frame 40mm x 24mm x 29mm and Ø12mm plunger?. 100% power 4.5 Watts dc 2.0N force at 4mm stroke
GD1253
Type GD1253 D Frame solenoid utilizes a 4-sided closed steel frame 53mm x 30mm x 27mm and Ø12mm plunger?. 100% power 6.0 Watts dc 1.0N force at 10mm stroke
GD1444
Type GD1444 D Frame solenoid utilizes a 4-sided closed steel frame 44mm x 38mm x 32mm and Ø14mm plunger?. 100% power 12.0 Watts dc 1.5N force at 14mm stroke
GD1743
Type GD1743 D Frame solenoid utilizes a 4-sided closed steel frame 43mm x 48mm x 41mm and Ø17mm plunger?. 100% power 14.5 Watts dc 2.0N force at 16mm stroke
MC0417
Model MC0417 C-Frame solenoid utilizes a C shaped steel frame 17mm x 10mm x 11mm and Ø4mm plunger. 100% power 1.5 Watts dc 0.05N force at 3mm stroke
MC0828
Model MC0828 C-Frame solenoid utilizes a C shaped steel frame 28mm x 19mm x 18mm and Ø8mm plunger. 100% power 2.4 Watts dc 0.3N force at 8mm stroke
MC0930
Model MC0930 C-Frame solenoid utilizes a C shaped steel frame 30mm x 33mm x 34mm and Ø9mm plunger. 100% power 9.0 Watts dc 0.5N force at 10mm stroke
MD0626
Type MD0626 D Frame solenoid utilizes a 4-sided closed steel frame 26mm x 20mm x 16mm and Ø6mm plunger?. 100% power 3.4 Watts dc 0.75N force at 4mm stroke
MD0837
Type MD0837 D Frame solenoid utilizes a 4-sided closed steel frame 37mm x 26mm x 21mm and Ø8mm plunger?. 100% power 5.2 Watts dc 1.0N force at 6mm stroke
MD1039
Type MD1039 D Frame solenoid utilizes a 4-sided closed steel frame 39mm x 29mm x 24mm and Ø10mm plunger?. 100% power 6.3 Watts dc 1.0N force at 8mm stroke
MD1241
Type MD1241 (Model D4) D Frame solenoid utilizes a 4-sided closed steel frame 41mm x 30mm x 25mm and Ø12mm plunger?. 100% power 8.5 Watts dc 1.0N force at 12mm stroke
MD1253
Type MD1253 D Frame solenoid utilizes a 4-sided closed steel frame 53mm x 30mm x 27mm and Ø12mm plunger?. 100% power 6.0 Watts dc 1.0N force at 10mm stroke
MD1335
Type MD1335 D Frame solenoid utilizes a 4-sided closed steel frame 40mm x 24mm x 29mm and Ø13mm plunger?. 100% power 7.0 Watts dc 2.0N force at 6mm stroke
MD1353
Type MD1353 D Frame solenoid utilizes a 4-sided closed steel frame 53mm x 32mm x 26mm and Ø13mm plunger?. 100% power 12.0 Watts dc 2.0N force at 10mm stroke
MD1444
Type MD1444 (Model D5) D Frame solenoid utilizes a 4-sided closed steel frame 44mm x 38mm x 32mm and Ø14mm plunger?. 100% power 12.0 Watts dc 1.5N force at 14mm stroke
MD1743
Type MD1743 D Frame solenoid utilizes a 4-sided closed steel frame 43mm x 48mm x 41mm and Ø17mm plunger?. 100% power 14.5 Watts dc 2.0N force at 16mm stroke
MD1764
Type MD1764 (Model D7) D Frame solenoid utilizes a 4-sided closed steel frame 64mm x 48mm x 41mm and Ø17mm plunger?. 100% power 19.0 Watts dc 1.0N force at 20mm stroke
Solenoids - Solenoids - Tubular
GT0639
Tubular solenoids are a popular choice for applications that require a compact size with performance that matches or exceeds the larger open frame solenoid designs for a given size. Ø19mm x 39mm 100% power 2.5 Watts dc 0.5N force at 4mm stroke
GT0852
Tubular solenoids are a popular choice for applications that require a compact size with performance that matches or exceeds the larger open frame solenoid designs for a given size. Ø19mm x 52mm 100% power 3.1 Watts dc 0.6N force at 4mm stroke
GT1152
Tubular solenoids are a popular choice for applications that require a compact size with performance that matches or exceeds the larger open frame solenoid designs for a given size. Ø25mm x 52mm 100% power 3.8 Watts dc 2.0N force at 4mm stroke
GT1958
Model GT1958 tubular solenoid has a 20mm stroke and can provide 9N force at 100% ED.
GT2876
Model GT2876 tubular solenoid has a 25mm stroke and can provide 28N force at 100% ED.
GT34102
Model GT34102 tubular solenoid has a 30mm stroke and can provide 35N force at 100% ED.
GT4036
The GT4036 tubular solenoid is specially designed for hydraulic valve applications. The GT4036 solenoid operates from 24Vdc and is pressure proof to 210 bar, providing 55N force @2.5mm stroke.
GT4045
The GT4045 tubular solenoid is specially designed for hydraulic valve applications. The GT4045 solenoid operates from 24Vdc and is pressure proof to 210 bar, providing 70N force @3mm stroke.
GT49111
Model GT34102 tubular solenoid has a 30mm stroke and can provide 50N force at 100% ED.
MT0525
Tubular solenoids are a popular choice for applications that require a compact size with performance that matches or exceeds the larger open frame solenoid designs for a given size. Ø13mm x 25mm 100% power 2 Watts dc 0.2N force at 4mm stroke
MT0618
Tubular solenoids are a popular choice for applications that require a compact size with performance that matches or exceeds the larger open frame solenoid designs for a given size. Ø17mm x 18mm 100% power 1.0 Watts dc 0.3N force at 2.5mm stroke
MT1034
Tubular solenoids are a popular choice for applications that require a compact size with performance that matches or exceeds the larger open frame solenoid designs for a given size. Ø32mm x 34mm 100% power 11 Watts dc 6.5mm stroke
MT2057
Tubular solenoids are a popular choice for applications that require a compact size with performance that matches or exceeds the larger open frame solenoid designs for a given size. Ø40mm x 57mm 100% power 13 Watts dc 10mm stroke
MT26110
Model MT26110 tubular solenoid has a 30mm stroke and can provide 8N force at 100% ED.
MT32134
Model MT32134 tubular solenoid has a 30mm stroke and can provide 38N force at 100% ED.
MT40162
Model MT40162 tubular solenoid has a 40mm stroke and can provide 60N force at 100% ED.
MT50205
Model MT50205 tubular solenoid has a 50mm stroke and can provide 100N force at 100% ED.

Technical Resources - Solenoids Technical Data
Solenoids Technical Information

STT280 Sealed Tilt Sensor
The STT280 is provided in an extremely compact housing, for the most arduous operating environments. It is suitable for applications such as road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container handling and hydraulic lift systems.
STT500 Sealed Tilt Sensor
The STT500 is provided in an extremely rugged cast aluminum housing, for the most arduous operating environments. It is suitable for applications such as road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container handling and hydraulic lift systems.

Copyright © Durham Instruments. All Rights Reserved.
1-888-DISENSOR
Website by cpNet